Crossport Systems Pivio Manuel d'instructions télécharger pdf (Page 33)

Primary Valve Supply Line Detail

Mount primary valve to center boom, below the Right Inner Boom secondary valve, using existing

mounting hole. Per the drawing on the previous page, run each supply line and the line to the pump

following existing hose bundles. Once the hose is routed to the valve, cut to length and install #246002

to hose end. Install #246002 into the open Tee inlet on each valve.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 44 45

Pas de commentaire

Crossport Systems Pivio Manuel d'instructions Page 33