Crossport Systems Pivio Manuel d'instructions télécharger pdf (Page 10)

System Operation

The key components of the Quicklub system are:

1. Pump with Integrated Timer

2. Divider valve network consisting of a Primary Valve and Secondary Valves with attached

Cycle Indicator Pin.

3. A lubrication event is initiated by actuating the pump via the Integrated Timer based on a

preset “pause time” or time between lubrication events.

4. The Pump dispenses lubricant to the primary divider valve

5. The Primary Valve distributes the lubricant to the secondary valves

6. The Secondary Valves distribute and dispense lubricant to the lubrication points.

7. Lubricant flow through the divider valves actuates the Cycle Indicator Pin for a visual

inspection pf proper operation.

The pump will run for the preset On-Time

8. The controller now begins countdown for the next lubrication event.

Cycle

Indicator Pin

R2 ValveR3 Valve

Primary

Valve

Secondary

Valves

Pump

Hose

Tubing

Lube Point

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 44 45

Pas de commentaire

Crossport Systems Pivio Manuel d'instructions Page 10