Crossport Systems Pivio Manuel d'instructions télécharger pdf (Page 26)

Left Middle/Outer 120 Foot Boom Lubrication Point Line Detail

Mount valve bracket to Boom using existing clamp

bolt. Center the valve between

Install #20026 into Inner and Outer Pivot ports

and a #20028 45 degree adapter into the #20026,

followed by a #223-12273-6 into the #20028 and

connect line from outlet 5 to the Outer Pivot and

line from outlet 6 to the Inner Pivot Port.

Install #20024 into Inner and Outer Center

Leverage Ports and #223-12273-6 into the

#20024. And connect line from outlet 3 to the

Outer Leverage and the line from outlet 4 to the

Inner Leverage.

Route line through the center opening and secure

to the rib with a zip tie to assure no rubbing will

take place.

Continue routing around the radius of the pivot

leaving some slack for folding.

Route lines with existing hoses across the fold

and back to the valve.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 44 45

Pas de commentaire

Crossport Systems Pivio Manuel d'instructions Page 26