Crossport Systems Pivio Manuel d'instructions télécharger pdf (Page 27)

Left Middle/Outer 120 Foot Boom Lubrication Point Line Detail

Note: The Inner and Outer Lower Pivot Points do not provide the needed clearance to

install a fitting and lube line. The lube ports will need to be repositioned in order to

connect to these points. This is an option, covered by the steps below.

Support the Boom and remove bolt (pin). Locate new lube port position so the line will route

away from the pivot point.

Drill hole for new lubricant port

icture of new lubrication port

Tap the new port to ¼-28 thread and clean out

bushing of shavings.

Install 20026 in lube port and #223-12273-6 into

20026. Route line from Inner Lower Pivot to valve

outlet 2 and Outer Lower Pivot to valve outlet 1.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 44 45

Pas de commentaire

Crossport Systems Pivio Manuel d'instructions Page 27